We all stay happy and feel lucky, but only from the moment till we are getting good internet speed. The moment we just lose it we tend to feel that we have lost everything. Slow internet is caused by many defaults. For ex- compatibility of the devices and so on. But you no need to worry as we are up with a number of troubleshooting tips to get over these issues.
Check your router’s eco settings
By default some routers are Setup up with the “Power savings” mode. Goal: we wish to save a good amount of kilowatts. But as we thought of this, it started reducing our bandwidth. However, a trustworthy Wavlink router was not set up with unnecessary power savings. So in addition, we turned on the lowest power modes to check how it impacted.
We hope the article is good in giving you knowledge about how the internet falls back but if you are not able then you can try to reset your device and perform Wavlink Extender Setup again.
Check Your Connections
Loose, broken, and damaged wires will decrease the connection quality. In addition, line splitters can degrade Internet signals even before reaching your modem. As well as prevent you from reaching higher Internet speed. Firstly, you need to detach the power cable from the back of the modem.
- Secondly, unclip the coaxial wire from the modem.
- Then after that, check the coaxial cable properly as it should not be bent or damaged.
- Therefore, follow to check whether the coaxial cable is not inappropriately hanging on the wall.
- See whether the coaxial cable goes into the jack directly, or whether it is passing through other devices, such as a splitter.
- Make sure to remove the splitter, so it could be easy to connect the coaxial line cable jack to the modem directly.
- Now reconnect the coaxial wire and power cable from the back of the modem.
- As a result, wait here for the modem to come back online.
Ethernets Best for Connections
If the ethernets are being used to connect, or a third party to your modem; then you should check your cables as well and replace them as they could appear. Further, you should ensure to connect at least a 5e ethernet cable. To make a compatible connection.
The Enemies Inside; Virus and Malware
Your device might be having some viruses even if you are not aware of them. Delete all the spyware and viruses from the software and see if it helps in increasing the memory of the device. They are proven to be the data and bandwidth suckers as they do their work in the background. Consequently, it sucks a lot of data and makes the internet slow.
Most of the time you are not even aware that this little spy is doing its work behind the curtains. A good antivirus is an actual solution for inspecting virus programs.
Run a Speed Test
Run a speed test to see how slow your internet connection is. SpeedTest.net is a great place to start. A report of your upload speed and download speed will be visible to you on your screen. Your download speed and the uploading speed that all be mentioned in the contract and should be there. Check it once and talk to your ISP if the provider is not sure about his wording.
Distance: Location of The Router
You will see simultaneously that your router will tend to reduce the internet signals as you move far from the router. The walls and the mirrors could also affect the quality of the signals, thicker walls could impact
your internet the most. The thicker walls mean higher obstacles for WiFi. Also, if you have mirrors between the router, the WiFi signal will get blocked to some extent.
As a simple solution, you can place your router in the central location where you spend most of your time with your devices. Another solution is enhancing the signal quality with range extenders etc.
We have tried giving a number of troubleshooting tips to make your internet effectively active, and compatible as well. But if your modem and your device are not in good connection because of some setup issues, try fixing them by redoing the wavlink extender login.
Also Read: wavlink extender not working